Joe Hoppen Motorsport, Inc
Engineered Performance
Photo Gallery
Check out the
pictures! You can view our collection and even submit your own.
MTM Wheel Spacers
MTM's
wheel spacer sets are made of an aluminum alloy precisely to the
required tolerances.
These have been TUV
tested, certified and approved for highway use. The center bore fits the
original hub centering perfectly and the outer hub centering fits the
original wheel perfectly so there will be absolutely no vibration. These
spacer sets are supplied with the necessary longer lug bolts.
Order Now
A6 C6 - 3.0T - 300 HP
Software | Wheels & Brakes | Suspension
**Specials apply through March 2010**
Software Upgrades:
Cantronic is the name of a new product family which allows a wide
range of vehicle optimizations and modifications. What all these modules
have in common is a connection with the vehicle´s so called CANbus.
The CANbus (Controller Area Network) is a serial bus framework
developed for the networking of control units. Modern
vehicles have up to 50 such units of which the ECU (engine control unit) is
the largest. Others are used for the transmission or the control of parts like
inside-adjustable outside mirrors, air bags, cruise control and audio system.
The communication among these control and sensor units is essential to get
response from sensors and ensure the coordination of all parts. With a lot
less effort of wiring than before it enables information exchange between
systems and is being used by our Cantronic to get access to necessary
information.
What is the Cantronic capable of?
The MTM Cantronic can be adapted to different fields of application.
When having access to the relevant data the Cantronic can precisely
modify the vehicle's series production status to guarantee an optimized
setup in every situation. By now the Cantronic is offered as M-Cantronic for
the modification of engine electronics and as F-Cantronic for the
optimization of the vehicle's chassis. Further applications are
currently being developed for example the suspension of the electronically
limited top speed or the fuel glass damper control.
_________________________________________________________________________________________________
Stage 1 M-Cantronic
(m1a6290360qm)
$2,875.00 (Shipping Included)
Special: $2,440.00 (Shipping Included)
-
Original HP : 300 @ 5,100-6,800 rpm | MTM HP : 370 @ 6,530 rpm +70 HP gain
-
Original TQ : 310 @ 2,500-5,100 rpm | MTM TQ : 355 @ 4,575 rpm +45 TQ gain
Request More Info Here
19 x 8.5" Bimoto Wheel Set
(m-fbk85935512)
Price $2,899.00 (Shipping Included)
MTM's Bimoto wheels were specifically designed for all VAG models and have attained TUV approval for all models. These wheel applications will clear all suspension components, brake components and use the factory original wheel lug bolts. Works with original TPMS sensors. Available in Shiney, Titanium, & Diamond Cut.
SPECS;
Size - 19 x 8.5"
Offset - ET35
Bolt Pattern - 5 x 112mm
Weight - 37 lbs.
Recommended Tire Size - 255/35-19
_______________________________________________________________________________________________________________________________________
Brembo 8 Piston 365x34mm Front Brake Kit
(m-1a6bre365v)
Price $3,999.00 (Shipping Included)
MTM's 365x34mm front brake kit was developed for extreme braking conditions as tested on the Autobahn. This kit contains two 365 x 34mm brake discs that are directionally center vented for superior performance. Also included are two two Brembo 8 piston calipers, two stainless steel brake hoses and all necessary. mounting hardware.
_______________________________________________________________________________________________________________________________________
Brembo 8 Piston 380x34mm Front Brake Kit
(m-0s5bre380vk)
Price $5,990.00 (Shipping
Included) Special:
$5,391 (Shipping
Included)
MTM's 380x34mm front brake kit was developed for extreme braking conditions as tested on the Autobahn. This kit contains two 380 x 34mm brake discs that are directionally center vented and dimpled for superior performance. Also included are two light weight center hats, two Brembo 8 piston calipers, two stainless steel brake hoses and all necessary. mounting hardware.
Lowering Spring Set (m-1a6045fq)
not as pictured
Price $499.00
(Front: 25 mm lowering | Rear: 20 mm lowering)
MTM Badge
Complete your vehicle with an
MTM Chrome Badge. Only $19.00 Buy Now
Having trouble? We'd love to hear any feedback. So Give Your Comments.