Software | Wheels & Brakes | Suspension | Exhaust System | Extras

Software Upgrades:

Cantronic is the name of a new product family which allows a wide range of vehicle optimizations and modifications. What all these modules have in common is a connection with the vehicle´s so called CANbus.

The CANbus (Controller Area Network) is a serial bus framework developed for the networking of control units. Modern vehicles have up to 50 such units of which the ECU (engine control unit) is the largest. Others are used for the transmission or the control of parts like inside-adjustable outside mirrors, air bags, cruise control and audio system. The communication among these control and sensor units is essential to get response from sensors and ensure the coordination of all parts. With a lot less effort of wiring than before it enables information exchange between systems and is being used by our Cantronic to get access to necessary information.

What is the Cantronic capable of?
The MTM Cantronic can be adapted to different fields of application. When having access to the relevant data the Cantronic can precisely modify the vehicle's series production status to guarantee an optimized setup in every situation. By now the Cantronic is offered as M-Cantronic for the modification of engine electronics and as F-Cantronic for the optimization of the vehicle's chassis. Further applications are currently being developed for example the suspension of the electronically limited top speed or the fuel glass damper control.

__________________________________________________________________________________________________

Stage 1 M-Cantronic (m3s4333380qm)    

Price $2,750.00 (Shipping Included)

• Original HP : 333  |    MTM HP: 380          +47 HP gain

• Original TQ : 325  |    MTM TQ: 363          +38 TQ gain

Request More Info Here

Vin Number

____________________________________________________________________________________

Stage 1+ M-Cantronic & V-Cantronic  (m3s4333380qmv) Speed limiter removal    

Price 3,495.00 (Shipping Included)

• Original HP : 333  |    MTM HP: 380          +47 HP gain

• Original TQ : 325  |    MTM TQ: 363          +38 TQ gain

• Top Speed   : 155  |    Top Speed: 174          +19 mph

Request More Info Here

Vin Number

____________________________________________________________________________________

Stage 2 M-Cantronic  (m3s4333430qm)    

Price $3,395.00 (Shipping Included)  

• Original HP : 333 @ 5,500-7,000 rpm  |    MTM HP: 430 @ 7,000 rpm  +97 HP gain

• Original TQ : 325 @ 2,900-5,300 rpm  |    MTM TQ: 382 @ 4,760 rpm  +57 TQ gain

Request More Info Here

Vin Number

____________________________________________________________________________________

Stage 2+ M-Cantronic & V-Cantronic  (m3s4333430qmv) Speed limiter removal    

Price $4,190.00 (Shipping Included) 

• Original HP : 333 @ 5,500-7,000 rpm  |    MTM HP: 430 @ 7,000 rpm  +97 HP gain

• Original TQ : 325 @ 2,900-5,300 rpm  |    MTM TQ: 382 @ 4,760 rpm  +57 TQ gain

• Original top speed : 155                        |    MTM top speed: 178 +23 mph

Request More Info Here

Vin Number

Back To Top

---

Wheels & Brakes:

    

 

 

---

19 x 8.5" Bimoto Wheel Set  (m-fbk85950512)     

Price $3,36000 (Shipping Included)

MTM's Bimoto wheels were specifically designed for all VAG models and have attained TUV approval for all models.  These wheel applications will clear all suspension components and brake components. Supplied with 15mm adapter kit. Works with original TPMS sensors. Available in Shiney, Titanium, & Diamond Cut.

SPECS;

Size - 19 x 8.5"

Offset - ET35 (15mm Adapter kit included)

Bolt Pattern - 5 x 112mm

Weight - 37 lbs.

Recommended Tire Size - 255/35-19

View Color Options

Finishes

Shiney Titanium Diamond Cut

___________________________________________________________________________________________________________________________________________

 

  20 x 9" Forged

 

20 x 9" Bimoto Forged Wheel Set  (m-fba92032512d)     

Price $6,890.00 (Shipping Included)  

MTM's Bimoto Forged wheels were specifically designed for all VAG models and have attained TUV approval for all models.  These wheel applications will clear all suspension components and brake components. Supplied with 10mm adapter kit. Works with original TPMS sensors. Available in Diamond Cut only.

SPECS;

Size - 20 x 9"

Offset - ET32 (10mm Adapter kit included)

Bolt Pattern - 5 x 112mm

Weight - 25 lbs.

Recommended Tire Size - 265/30-20

___________________________________________________________________________________________________________________________________________

 

Brembo 8 Piston Front Brake Kit  (m-0s5bre380vk)     

Price $5,990.00 (Shipping Included)  

MTM's 380x34mm front brake kit was developed for extreme braking conditions as tested on the Autobahn. This kit contains two 380 x 34mm brake discs that are directionally center vented and cross drilled for superior performance. Also included are two light weight center hats,  two Brembo 8 piston calipers, two stainless steel brake hose and all necessary. mounting hardware.

 

Back To Top

---

Suspension:

   

---

Adjustable Height Spring Kit (m-3s4105qa)    

Price $1,190.00

(Front: 10-40 mm lowering | Rear: 15-45 mm lowering)

Back To Top

---

Exhaust System:

MTM's  Stainless Steel Sport Exhaust Systems are engineered to achieve the maximum possible performance for street applications while retaining moderate sound decibels and no annoying interior drone through poor exhaust design transmitting engine exhaust harmonics. Handmade in Germany from the finest quality stainless steel and constructed with the finest craftsmanship.

________________________________________________________________________________________________

Stainless Steel Cat-Back Exhaust System 4 - 89mm tips  

Price $3,990.00 

 

Stainless Steel Cat-Back Exhaust w/ Throttle Valves 4-89mm tips 

Price $5,290.00

 

Stainless Steel Cat-Back Exhaust w/ Throttle Valves oval black ceramic tips 

Price $5,890.00 (Shipping Included)

Extra Items:

New for the A4/A5/S4/S5/Q5 6-speed is our HyperShift short shifter. Our 10 minute installation shift throw reduction and smoothness increasing short shifter blows everything away. You get a big gain in control with a 45% reduction in throw. Then we attack smoothness in two ways. One- we add a pair of precision cartridge bearings to our pivot point for frictionless actuation. Two- we retain the factory shift lever which contains special vibration isolating materials at two critical points. Stock shift height is retained, no short cuts to short shifting by just dropping the knob height here. You will need to get your car up in the air for the installation but there is no fussing with interior trim and the potential heartbreak of damaging or scratching your interior parts.

$149.00

Fastest install, smoothest action, best price by far, damage-free installation.

Click here for Installation Instructions in Adobe Acrobat format

Back To Top

Home | Contact Us | Products | Dealers | Extras |

© 2010 Joe Hoppen Motorsport, Inc. - All Rights Reserved  -All logos and trademarks are property of their rightful owners and JHM has no affiliation.